Product Description:

The MDD065B-N-060-N2L-095GA0 is a synchronous servomotor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers where rapid position and velocity regulation are required on compact machine axes. The motor forms part of closed-loop automation stages in packaging lines, pick-and-place systems, and other equipment that benefits from electronic commutation and precise torque delivery. Its compact format suits servo axes where fast response and repeatable positioning are more important than high continuous torque.

This model delivers a continuous standstill torque of 1.5 Nm, giving it enough holding capability for light-to-medium loads while stationary. A rated speed of 6000 rpm allows high cycle frequencies without mechanical overspeed. Rotor alignment during installation is aided by a centering diameter of 95 mm, and the rotor is trimmed to a standard balancing grade that limits vibration over the full speed range. Position and speed data are returned through digital servo feedback, enabling the drive to correct errors within each control cycle. The B-length housing uses the series' standard enclosure style and integrates a shaft seal that helps keep contaminants away from the bearing set.

Cabling is routed on the Side A face where a Connector mates with the drive harness, simplifying panel layout and keeping the cable exit aligned with compact machine frames. The motor uses size code 065 for its stator cross-section, and the output is a plain shaft with no secondary shaft on side B, which helps keep the overall length short. Because the unit is built without a blocking brake, any static holding requirements must be met by the drive or an external brake. A standard housing finish supports general industrial use, and the shaft end is intended for direct coupling where a keyed interface is not required.