MDD065B-N-040-N2M-095GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD065B-N-040-N2M-095GR1 is a synchronous motor from the MDD Synchronous Motors series, featuring a nominal speed of 4000 rpm and a continuous torque at standstill of 1.5 Nm. This motor comes with an integrated multiturn absolute encoder and a holding brake with 3.0 Nm torque. It has a centering diameter of 95 mm, a plain shaft with seal, and digital servo feedback for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065B-N-040-N2M-095GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers and converts commanded current into proportional torque and speed. This supports precise axis motion in packaging stations, pick-and-place gantries, and similar industrial automation equipment. Its synchronous design supports repeatable positioning and stable speed regulation during frequent starts and stops. That behavior suits indexing, transfer, and positioning tasks where the commanded speed must change quickly without losing control.
This model develops a continuous standstill torque of 1.5 Nm, so the drive can hold or slowly move a load without overheating at zero speed. Under rated conditions, the rotor reaches a nominal speed of 4000 rpm, matching machines that need rapid yet controllable motion. A centering diameter of 95 mm helps align the motor with gearboxes or mounting flanges. Power and feedback conductors exit the housing on the right side, which should be considered when planning cable routing and nearby mechanical clearances. The side cable exit also helps when rear clearance behind the motor is limited. The motor uses a plug-in connector interface, allowing connections to be made without disturbing sealed cable assemblies.
A blocking brake is included and can lock the shaft with 3.0 Nm of torque, helping prevent drift on vertical or suspended axes when power is removed. Position information is returned through digital servo feedback (DSF), and the integrated multi-turn absolute encoder supports homing-free startup after power cycles. For applications requiring smooth coupling to load elements, the unit is supplied with a plain shaft that has no keyway. It also has a shaft seal, which helps block lubricant ingress and retain internal grease during high-speed rotation. The motor uses frame size 065 with B length, a standard housing, standard dynamic balancing, and no auxiliary shaft end on side B.
Frequently Asked Questions about MDD065B-N-040-N2M-095GR1:
Q: What kind of encoder does the MDD065B-N-040-N2M-095GR1 motor use?
A: The MDD065B-N-040-N2M-095GR1 features an integrated multiturn absolute encoder for precise position feedback.
Q: Does the MDD065B-N-040-N2M-095GR1 include a holding brake, and what is its torque?
A: This motor comes equipped with a blocking brake that provides a holding torque of 3.0 Nm.
Q: What is the continuous torque at standstill for the MDD065B-N-040-N2M-095GR1?
A: The continuous torque at standstill for this motor is rated at 1.5 Nm.
Q: What type of shaft and sealing does the MDD065B-N-040-N2M-095GR1 motor have?
A: It is equipped with a plain shaft and a shaft seal for added protection against contaminants.
Q: What is the nominal speed of the MDD065B-N-040-N2M-095GR1?
A: The motor is designed for a nominal speed of 4000 min⁻¹, supporting high-speed applications.
