MDD065B-N-040-N2M-095GB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911251163
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
56 Seconds
The Bosch Rexroth Indramat MDD065B-N-040-N2M-095GB0 is a synchronous motor from the MDD Synchronous Motors series designed for digital drive controllers. It features a nominal speed of 4000 rpm, a continuous torque at standstill of 1.5 Nm, and comes with an integrated multiturn absolute encoder. The motor has a plain shaft with a shaft seal and a centering diameter of 95 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065B-N-040-N2M-095GB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical energy into precisely regulated rotation for positioning tables, feeders, and small conveyors in automated production cells. The motor supports coordinated speed, torque, and position control in compact servo systems. It is well suited to short indexing moves and continuous cyclic operation in automated equipment. Its operating concept supports repeatable motion where accurate response and consistent feedback help the axis follow commanded moves without drift.
With a centering diameter of 95 mm, the size-065 frame with length code B aligns with standard servo flanges and keeps overall mass low. The rotor is balanced to the standard grade, so runout remains minimal even when the shaft reaches its nominal speed of 4000 rpm. At standstill, the electromagnetic system can deliver 1.5 Nm of continuous torque, allowing the axis to resist steady load without auxiliary gearing. Power and feedback lines exit through a connector on side B, which simplifies cable routing when the motor is mounted with the shaft facing the drive side. This layout helps keep cable bends organized in tightly spaced machine sections.
For position reference, the motor uses an integrated multi-turn absolute encoder that works with digital servo feedback to close the control loop in the drive electronics. The encoder stores position across multiple revolutions, so the drive can reference shaft location immediately after startup. There is a shaft seal at the output end to limit the ingress of lubricants and fine particles, which supports installation in light washdown areas. Because the unit is supplied without a blocking brake, static holding must be provided by the drive or by external mechanics when power is removed. The plain shaft has no secondary shaft end, and the housing follows the standard enclosure style used for this motor line.
Frequently Asked Questions about MDD065B-N-040-N2M-095GB0:
Q: What type of encoder is installed on the MDD065B-N-040-N2M-095GB0 motor?
A: This model includes an integrated multiturn absolute encoder.
Q: What is the continuous standstill torque for the MDD065B-N-040-N2M-095GB0?
A: The motor provides a continuous torque at standstill of 1.5 Nm.
Q: What type of shaft and sealing does the MDD065B-N-040-N2M-095GB0 feature?
A: A plain shaft design is used on this motor, and it includes a shaft seal.
Q: What is the nominal speed of the MDD065B-N-040-N2M-095GB0 motor?
A: The nominal operating speed for this model is 4000 min⁻¹.
Q: Does the MDD065B-N-040-N2M-095GB0 motor include a holding brake?
A: There is no blocking brake included with this specific model.
