Product Description:

The MDD065A-N-060-N2M-095PR0 is a permanent-magnet synchronous motor produced by Bosch Rexroth Indramat for use within the MDD Synchronous Motors series. It is intended for pairing with digital drive controllers where rapid velocity loops and tight position control are required on compact axes such as pick-and-place heads or small indexing tables. By generating torque directly on the shaft without gear reduction, the unit supplies precise electrical servo performance suited to automated assembly stations and light material-handling modules. This direct-drive behavior helps reduce backlash from intermediate transmission components and supports repeatable motion on short-cycle equipment.

With a nominal mechanical speed of 6000 rpm, the motor can follow high-frequency command profiles while maintaining smooth commutation. At standstill, it delivers 0.8 Nm of continuous torque, making it suitable for low-inertia loads that must be held during dwell periods. Position and velocity data are provided by an integrated multiturn absolute encoder, and the signal is conveyed through digital servo feedback (DSF), allowing the drive to calculate exact angular displacement without external converters. This feedback arrangement keeps the motor package compact while giving the control system immediate rotor information during closed-loop operation. The unit is supplied without a blocking brake, so any load-holding during power-off must be managed by external mechanical means or by keeping the drive energized.

Mechanical integration is simplified by a 95 mm centering diameter that mates with standard mounting flanges, and standard balancing limits residual vibration across the permitted speed range. Power and feedback cables exit via a right-side connection, keeping wiring clear of adjacent axes when the motor is mounted in a horizontal cluster. The output shaft uses a keyway for positive torque transmission into couplings, and it has a single-ended configuration without a side-B stub. A shaft seal helps reduce the ingress of dust or coolant spray and protects the internal bearings during continuous duty in production environments.