Product Description:

The MDD065A-N-060-N2M-095PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. The unit couples to digital drive controllers to generate controlled rotary motion in compact automation axes, pick-and-place stations, and other machinery that require responsive torque at high speed. With an integrated multi-turn absolute encoder, the motor provides precise position data back to its drive, enabling closed-loop control over motion profiles in factory automation.

A centering diameter of 95 mm fixes the stator coaxially to mounting flanges and supports repeatable alignment. At standstill, the motor can deliver 0.8 Nm of continuous torque, allowing stable holding or low-speed feed tasks without overheating. During motion, the rotor can reach a nominal velocity of 6000 rpm, so the drive can support lightly loaded spindles or small conveyor rolls at elevated surface speeds. Position and speed are returned as digital servo feedback, which keeps the controller informed with high-resolution data for dynamic correction. Because the frame is supplied without a blocking brake, any power-off holding force must instead be provided by external mechanical locks or by maintaining drive current.

The motor belongs to frame size 065 and length code A, giving it a short body that fits tight machine envelopes while preserving the thermal mass needed for continuous duty. Power and feedback conductors exit on the left side through a molded connector, minimizing cable loops when the axis is positioned near cabinet walls. A shaft seal is installed to restrict lubricant migration, and the output shaft is ground with a keyway so torque can be transmitted directly into couplings. Internal rotor machining follows standard balancing criteria, limiting vibration during high-speed operation.