Product Description:

The MDD065A-N-060-N2M-095PA1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It serves as a motor for digital drive controllers, converting commanded current into precise rotary motion for positioning tables, pick-and-place arms, and light packaging axes. A compact housing and integrated feedback hardware allow installation inside tight machine enclosures and on moving gantries where weight and space are restricted. Its synchronous design supports accurate response to current commands during speed and position control.

The motor seats against a centering shoulder of 95 mm, which helps align the housing during installation. Its standard balancing grade limits residual vibration during high-speed cycles. Continuous torque at standstill is rated at 0.8 Nm, providing stable holding force without thermal overload when the shaft is locked. Under rated excitation it reaches a nominal speed of 6000 rpm, which suits fast indexing duties. Motion data are returned to the drive through digital servo feedback (DSF). The motor has size 065, and frame length A gives it the shortest stack length in this size. A molded connector handles power and feedback conductors, and the rear face remains closed because there is no shaft extension on side B.

An internal brake develops 3.0 Nm for holding at zero speed and for securing vertical loads when the axis is stopped. Position information over power cycles is maintained by an integrated multiturn absolute encoder, so the axis does not need a homing move after restart. The output journal uses a keyway for torque transmission through keyed couplings, and a factory-installed shaft seal helps keep lubricant out of the motor cavity. Power and signal plugs are oriented on side A, which can simplify cable routing along the machine wall. The motor also uses a standard housing finish that fits enclosed machine installations.