Product Description:

The MDD065A-N-060-N2M-095GR0 servo motor is built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for digital drive controllers and provides precise rotary motion for automated machinery such as pick-and-place stations and small indexing tables. The 065 frame size with the A-length housing lets the motor fit tight mechanical envelopes while still supplying the response and accuracy required in modern industrial automation. This compact format helps the motor fit axis assemblies where available mounting space is limited but controlled motion is still required.

The motor can sustain 0.8 Nm of continuous torque at standstill, allowing it to hold position under load without excessive heating. During operation, the rotor reaches a nominal speed of 6000 rpm, giving fast cycle times in applications that demand high throughput. Mechanical alignment during installation is aided by a centering diameter of 95 mm, so coupling concentricity can be maintained. Power and feedback conductors exit on the right because the connection direction is Right, which can simplify cable routing where space on the opposite side is limited. To protect internal bearings from contaminants, the shaft is equipped with a shaft seal, making the motor suitable for locations where fine dust or coolant spray may be present.

Position feedback is handled through digital servo feedback (DSF), and the rotor angle is measured by an integrated multiturn absolute encoder, so the drive receives position data immediately after power-up. The unit is supplied without a blocking brake, so an external holding method is needed if the load must remain secured when power is removed. Motor power and feedback are passed through a single connector, which reduces the number of cable interfaces on the motor housing. Standard dynamic balancing helps limit vibration during operation, and the plain shaft supports straightforward coupling to compatible machine elements.