Product Description:

The MDD065A-N-060-N2M-095GB0 synchronous servo motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it converts drive output current into rotary motion for compact axes in automated machinery, packaging equipment, and material-handling lines. Its role is to supply precise speed and position control when paired with the manufacturer’s drive modules, allowing closed-loop performance in tasks that demand fast acceleration and tight motion repeatability.

Mechanically, the motor seats against a centering flange measuring 95 mm, and standard dynamic balancing minimizes residual vibration during high-speed operation. At standstill, the electromagnetic design produces 0.8 Nm of continuous torque, giving stable holding force for light loads while thermal rise stays within the Class F insulation limit. A rated speed of 6000 rpm lets the axis reach rapid traverse velocities without overspeeding the rotor laminations. Power and feedback conductors exit on side B, and a single-piece connector simplifies plug-in installation inside tight enclosures. Because the unit is supplied without a blocking brake, external clamping or drive torque must maintain position when power is removed.

Position reporting is delivered by the integrated multiturn absolute encoder, which counts several revolutions so homing cycles are unnecessary after power loss. Encoder signals travel through digital servo feedback (DSF), allowing the drive to process position data in high-resolution control loops. A plain shaft transmits torque directly to couplings, and the presence of a shaft seal limits lubricant egress and particle ingress at the motor face. The A-length stator and 065 frame size keep the motor compact for gantry or pick-and-place heads, and the standard housing supports installation on space-limited axes.