Product Description:

The MDD065A-N-060-N2M-095GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts commanded current into precise rotary motion for pick-and-place axes, feeders, and light spindle tasks. Integrated feedback and an internal brake allow the motor to hold position without external locking hardware, which helps keep the drive package compact in distributed automation assemblies.

The motor develops a continuous standstill torque of 0.8 Nm, allowing steady holding force without overheating at rated current. A blocking brake adds 3.0 Nm of static torque when power is removed, which helps prevent vertical or suspended loads from drifting. During motion, the rotor reaches a nominal speed of 6000 rpm, matched to the thermal limits of the standard housing and A-length stator package. Position data is generated by an integrated multi-turn absolute encoder and transmitted through digital servo feedback (DSF), allowing homing-free startup and high-resolution velocity loops. Electrical power and signal conductors terminate on a sealed connector, which simplifies cabinet removal during service.

The mechanical interface follows the 065 frame pattern and provides a centering flange of 95 mm to align the motor on gearboxes or adapter plates. All connectors face side A, so cable routing remains consistent when several MDD units are mounted in parallel. A plain shaft is supplied from the factory, and it is protected against lubricant loss and dust ingress by an integrated shaft seal. The model omits a secondary shaft on side B, which shortens the overall length and supports compact machine layouts. The housing shape and cable orientation fit installations where mounting space around the motor is limited.