Product Description:

The MDD065A-N-060-N2L-095PR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current into precise rotary motion so pick-and-place devices, small gantries, and indexing tables can follow tight position and velocity profiles in industrial automation cells. The motor is intended for closed-loop axis operation where quick response and repeatable positioning are needed during frequent starts, stops, and reversals. Its compact form also makes it suitable for machines that must fit several servo axes into a limited installation space.

The motor’s nominal speed reaches 6000 rpm, giving the axis a wide operating range for rapid moves and short cycle times. At standstill, it delivers 0.8 Nm of continuous torque, which supports light holding loads without extra cooling. An integrated blocking brake supplies 3.0 Nm, helping prevent back-driving when power is removed. A centering diameter of 95 mm seats the housing accurately on the machine frame. Rotor position is monitored through Digital servo feedback (DSF), which sends precise feedback signals to the drive for stable current, speed, and position control. Wiring exits to the right side, which can simplify cable routing when several axes are installed close together.

Power and feedback lines terminate on a single connector, which keeps the electrical interface compact and easy to route in confined machine sections. The output shaft uses a keyway so standard keyed couplings can transmit torque without special shaft adapters. A shaft seal is installed to help keep coolant and lubricant away from the front bearing area. Standard balancing helps the motor run smoothly at high speed, and the short A-length housing keeps overall depth low. The motor also uses a standard housing and does not include a side B shaft end, which helps preserve space near neighboring components.