Product Description:

The MDD065A-N-060-N2L-095PL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it supplies controlled rotary motion for positioning and velocity loops in automated packaging lines, pick-and-place stages, and light material-handling axes. The unit has a standard housing, standard balancing, and a single-ended shaft, so it fits installations where compact motor length is important. This layout makes the motor suitable for axis arrangements that need precise motion without taking up unnecessary space around the drive end.

A nominal speed of 6000 rpm allows short cycle times when the drive issues rapid command changes. The motor supplies a continuous stall torque of 0.8 Nm, which is the load it can hold continuously without exceeding thermal limits. An integrated blocking brake provides a static holding capability of 3.0 Nm for vertical or load-holding axes. Rotor position is reported through digital servo feedback (DSF), allowing precise commutation and stable closed-loop control. Service connectors are located on the left face, with a Left connection direction that can simplify cable routing when the machine layout places neighboring components on that side. Frame designation 065 corresponds to a compact stator diameter that helps keep inertia low for smaller gantry and feeder applications.

Mechanical alignment is handled by a 95 mm centering diameter that mates with gearboxes or mounting plates to maintain concentricity during operation. Torque is transmitted through a shaft machined with a keyway, and a shaft seal helps block dust or oil from reaching the bearing area. The standard connector type supports straightforward attachment of power and feedback leads. Motor length code A keeps the package short, which is useful where guarding, brackets, or adjacent axes limit the available installation space.