Product Description:

Bosch Rexroth Indramat manufactures the MDD065A-N-060-N2L-095PB0 in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it transforms commanded three-phase current into precise rotary motion for positioning and velocity-controlled axes in compact assembly, packaging, and material-handling stations. Its compact frame helps it fit machines where installation space is limited, and it pairs with compatible Indramat inverters that process the embedded encoder signal for closed-loop control. This arrangement lets the drive monitor rotor position continuously, which helps the axis respond predictably during indexing, speed changes, and repeated start-stop cycles.

At the mechanical interface, the rotor is centered by a 95 mm pilot diameter, and its shaft uses a keyway for direct connection to pulleys or couplings. During continuous stall, the motor produces 0.8 Nm of torque, while the winding supports a top operating speed of 6000 rpm for fast axis movement over a broad speed range. Position data returns to the drive through digital servo feedback (DSF), which supports accurate speed and position regulation during changing load conditions. Electrical power reaches the stator through a sealed connector, and the motor is supplied without a blocking brake, so holding force must come from the machine or the amplifier. The sealed power connection also helps maintain reliable cable entry in enclosed machine layouts.

The connections exit on Side B, which can simplify routing when the motor is mounted close to a panel or machine wall. A shaft seal helps protect the front bearing area from contamination, and the rotor uses Standard balancing to reduce vibration during high-speed operation. The compact motor length code A keeps axial space requirements low while still allowing room for the integrated feedback device. This layout leaves the non-drive end free of a shaft extension, which can simplify guarding and reduce interference with nearby machine components.