Product Description:

The MDD065A-N-060-N2L-095PA1 is a synchronous servo motor produced by Bosch Rexroth Indramat for use with digital drive controllers. It belongs to the MDD Synchronous Motors series and serves as the electromechanical actuator in closed-loop automation axes where rapid speed regulation and precise torque delivery are required. Designed as a compact motor for digital drive systems, it converts electrical commands from the controller into proportional mechanical rotation for positioning and process duties. Its synchronous design supports repeatable positioning and stable speed control in compact automated equipment.

The unit supplies a continuous standstill torque of 0.8 Nm, giving the axis modest holding capability without overheating under rated current. During motion, it reaches a nominal rotor velocity of 6000 rpm, which suits high-speed pick-and-place and other rapid indexing tasks. The centering flange is machined to 95 mm, providing the pilot fit in the mounting interface for accurate alignment. Position and velocity data are returned to the drive through digital servo feedback (DSF), enabling sinusoidal commutation and fault monitoring. Power and encoder leads connect through a sealed connector, which keeps wiring compact inside cabinet harnesses. Standard balancing and a normal-duty housing help limit vibration and support heat transfer through the motor frame.

A blocking brake inside the rear housing delivers 3.0 Nm of static torque to help prevent back-drive when power is removed. The compact stator uses motor size 065 with length code A, which helps the motor fit in multi-axis layouts with limited space. Cables exit on side A, helping route service loops away from neighboring equipment and leaving more clearance around adjacent axes. The rotor uses a keyway shaft end with a shaft seal to support secure load coupling and reduce contaminant entry, and the design provides only a drive-side shaft with no side-B extension.