Product Description:

The MDD065A-N-060-N2L-095PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed to pair with digital drive controllers, the unit converts regulated armature current into precise mechanical motion for indexing tables, pick-and-place axes, and other cyclic automation functions. Its compact housing, centering pilot, and keyed shaft suit installations that need rapid acceleration, repeatable positioning, and stable closed-loop operation over changing loads. The motor is intended for applications where accurate speed control and encoder-based feedback are required throughout repeated start-stop cycles.

At standstill, the motor can continuously deliver 0.8 Nm of torque. This continuous output allows it to hold or move light loads without extra cooling when the axis remains at zero speed. Under rated drive excitation, it reaches a nominal speed of 6000 rpm, allowing high surface speeds for light tooling or conveyor rollers. The flange centering pilot measures 95 mm, which helps align the motor accurately on machine faces and maintain concentric mounting. All electrical terminations exit on Side A, and the single plug-in Connector simplifies power and feedback wiring. Rotor position and velocity are returned through digital servo feedback, giving the controller high-resolution data for closed-loop regulation and diagnostics.

The motor is supplied without a blocking brake, so holding torque during power-off conditions must be provided by the drive or by an external clamp. Frame size 065 keeps mass low and inertia suitable for fast reversal tasks, while standard dynamic balancing helps limit vibration across the speed range. A keyed shaft provides positive torque transfer to the coupled load, and the integral shaft seal helps protect the front bearing from splashed coolant or airborne dust. These features support reliable use in compact automated equipment where accurate motion and clean cable routing are important.