Product Description:

The MDD065A-N-060-N2L-095GR0 synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Intended for digital drive controllers, it converts stator currents into precisely regulated shaft rotation for auxiliary axes in automated machining cells, small packaging stations, semiconductor handling modules, and other compact motion units. Its role in closed-loop motion systems is to support digital control, where integrated electronic feedback updates velocity and position during every control cycle.

At standstill, the motor can deliver 0.8 Nm of continuous torque, enough to hold tooling or a light load without exceeding thermal limits while excitation is maintained. Once running, a nominal speed of 6000 rpm lets the axis reach high linear rates when coupled directly to belt wheels, miniature lead screws, or similar compact transmission elements. Mechanical centering is provided by a 95 mm pilot diameter that aligns the flange with the machine frame and keeps the rotor concentric. Electrical and feedback conductors exit on the right side, and the power and signal lines are routed through a single connector to simplify harness routing in tight cabinets. Balancing is standard, which helps reduce residual vibration at full speed, while the cast housing dissipates heat to ambient air. Position information is supplied through digital servo feedback, so the controller receives real-time incremental and absolute data.

Size 065 and the short A length code keep the motor compact for adjacent-axis mounting in spaces where couplings and guards leave little clearance. Drive power passes through a plain shaft, so a clamp coupling is recommended because no keyway is present. Operation remains sealed by a front bearing fitted with a shaft seal, and the absence of a side B shaft end simplifies installation. Supplied without a blocking brake, the unit relies on the drive or external clamps for static holding.