Product Description:

The MDD065A-N-060-N2L-095GA1 synchronous motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers closed-loop electromechanical actuation for pick-and-place stations, small conveyors, and indexing tables where fast acceleration and precise velocity control are required. The unit integrates a blocking brake and feedback electronics, so the connected controller can hold position when power is removed and monitor rotor status during each motion cycle. This arrangement supports repeatable starts, stops, and position holding in compact automated equipment.

Continuous torque at standstill is 0.8 Nm, indicating the sustained twisting force the motor can deliver while the shaft remains stopped without overheating. During normal operation, it can turn at 6000 rpm, a nominal speed that suits high-frequency inverter output in light-duty servo axes. The centering pilot measures 95 mm, providing an alignment surface that helps keep the motor concentric with the machine frame. When power is removed, the blocking brake supplies 3.0 Nm of holding torque to restrain suspended or inertial loads. Position information is generated by digital servo feedback, allowing the drive to close the control loop without an external encoder.

The mechanical layout uses motor size 065, and all power and signal connectors use a connection on side A, which can simplify cable routing in narrow cabinets. A sealed connector handles terminations, which helps protect connections from contamination. There is no side-B shaft extension, which helps keep the package compact. The output uses a plain shaft and includes a shaft seal to limit lubricant migration and the entry of airborne particles. Standard balancing and housing options, together with motor length code A, keep mass and envelope dimensions low while maintaining smooth rotation at the stated operating points.