Product Description:

The MDD065A-N-040-N5M-095PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it provides rotary actuation in automated machinery that relies on closed-loop electronic drives for speed and position control. Its compact frame and standard housing allow the motor to fit into tight mechanical envelopes while still delivering the responsiveness expected in indexing tables, small pick-and-place axes, and light packaging equipment. This makes it suitable for applications that require accurate acceleration, repeatable stopping, and stable low-speed operation.

A centering diameter of 95 mm aligns the stator face concentric with the driven load, and wiring exits on side B so cable routing can follow rear machine channels. The power and feedback loom terminates through a sealed connector, reducing assembly time compared with potted leads. Under continuous stall conditions, the rotor delivers 0.8 Nm of torque, and at rated electrical frequency it reaches a nominal speed of 4000 rpm. Standard dynamic balancing limits vibration transfer to adjacent bearings throughout the full speed range.

Position and diagnostic data are provided by an integrated multi-turn absolute encoder, which lets the associated drive track shaft angle across multiple revolutions. Feedback is transmitted as digital servo feedback, giving the controller high-resolution velocity information for tight loop tuning. Because the motor is supplied without a blocking brake, any static load must be held either by drive current or by an external mechanical lock. The output shaft uses a keyway profile and includes a factory-installed shaft seal to keep lubrication within the machine frame. The motor has size 065, length code A, and standard housing materials used for routine industrial service.