MDD065A-N-040-N5M-095PA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911258777
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD065A-N-040-N5M-095PA0 is a synchronous motor from the MDD Synchronous Motors series with a nominal speed of 4000 rpm and a motor size code of 065. It features digital servo feedback and an integrated multiturn absolute encoder, and comes with a shaft seal and keyway shaft type. The motor offers a continuous torque at standstill of 0.8 Nm and uses a connector on Side A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065A-N-040-N5M-095PA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it delivers controlled rotary motion to indexing tables, pick-and-place actuators, and other light-duty axes in industrial automation. Its compact 065 frame size and length code A allow installation in machinery with limited space. The motor converts regulated electrical current into precise torque, allowing the connected drive to control position, velocity, and acceleration during repetitive motion cycles.
The motor produces a continuous standstill torque of 0.8 Nm, supplying holding force for precision positioning tasks while the axis remains energized. During normal operation, the shaft reaches a nominal speed of 4000 rpm, allowing the drive controller to execute fast point-to-point movements without mechanical gearing. The flange has a centering diameter of 95 mm, and standard dynamic balancing helps limit vibration at the rated speed. Power and feedback conductors exit on Side A, which supports organized cable routing within the machine. A plug-style connector provides a secure interface for the servo cables. A keyway machined into the output shaft provides positive torque transmission to pulleys, gearboxes, or rigid couplings.
The feedback system includes an integrated multi-turn absolute encoder that reports the rotor position and revolution count to the drive. The motor also transmits supplementary position data through its digital servo feedback (DSF) channel, supporting accurate commutation and closed-loop motion control. The unit is supplied with a shaft seal to help prevent lubricant leakage and reduce contaminant entry along the shaft. It is supplied without a blocking brake, so an energized controller or an external mechanical lock must secure any static load. The housing uses the standard form associated with this motor series, while the internal winding arrangement corresponds to motor length code A. Its low-inertia design supports responsive acceleration in applications that require frequent starts, stops, and direction changes.
Frequently Asked Questions about MDD065A-N-040-N5M-095PA0:
Q: What type of encoder does the MDD065A-N-040-N5M-095PA0 motor use?
A: This model is equipped with an integrated multiturn absolute encoder for position feedback.
Q: What is the continuous standstill torque of the MDD065A-N-040-N5M-095PA0 motor?
A: The MDD065A-N-040-N5M-095PA0 motor provides a continuous torque of 0.8 Nm at standstill.
Q: Does the MDD065A-N-040-N5M-095PA0 motor include a holding brake?
A: This motor is manufactured without a holding brake.
Q: Where is the electrical connection located on the MDD065A-N-040-N5M-095PA0 motor and what type is it?
A: The connection for this motor is on Side A and uses a connector type interface.
Q: What shaft features are included on the MDD065A-N-040-N5M-095PA0 motor?
A: This model features a keyway shaft with a shaft seal for enhanced mechanical connections and protection.
