MDD065A-N-040-N5M-095GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911255018
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD065A-N-040-N5M-095GA0 is a motor designed for digital drive controllers, and belongs to the MDD Synchronous Motors series. This model has a nominal speed of 4000 rpm, a continuous torque at standstill of 0.8 Nm, and comes with an integrated multiturn absolute encoder and digital servo feedback. It features a 95 mm centering diameter, is equipped with a plain shaft and a shaft seal, and uses a connector on Side A for connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065A-N-040-N5M-095GA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers where compact rotary axes require precise velocity and position feedback. Used with a compatible digital drive controller, it supports compact rotary axes that need accurate speed regulation and repeatable positioning. This model supplies motion to light machining spindles, pick-and-place heads, or small conveyor sections and comes without a blocking brake, so position holding during power-off conditions must be provided by the control loop or a mechanical lock.
Its dynamic behavior suits low-inertia applications where quick response is important. The motor develops a continuous standstill torque of 0.8 Nm, enabling repeatable holding force while current remains within the rated envelope. Under rated excitation, it reaches a nominal speed of 4000 rpm, giving headroom for rapid indexing or fine feed adjustment. A centering diameter of 95 mm matches standard mounting flanges and helps maintain concentricity between the stator housing and the driven mechanics. The motor has a frame size of 065, and length code A indicates the shortest stack in this size, which helps minimize mass and thermal footprint. It uses a standard housing and standard balancing for machines that do not require special damping or extended sealing.
Power and signal connectors are located on Side A. This keeps cable routing parallel with adjacent axis drives and can help simplify installation on tightly spaced assemblies. Rotor position is monitored by an integrated multi-turn absolute encoder that feeds the drive through digital servo feedback, which removes the need for an external reference switch after power-up. There is a shaft seal at the output end to resist coolant splash. The output uses a plain shaft for direct coupling or collet clamping, and the unit also uses a standard connector interface, standard housing classification, and standard dynamic balancing.
Frequently Asked Questions about MDD065A-N-040-N5M-095GA0:
Q: What type of encoder is integrated into the MDD065A-N-040-N5M-095GA0 motor?
A: This motor features an integrated multiturn absolute encoder for precise position feedback.
Q: Does the MDD065A-N-040-N5M-095GA0 motor include a holding brake?
A: The motor is designed without a blocking brake.
Q: Does the MDD065A-N-040-N5M-095GA0 have a shaft seal?
A: A shaft seal is included on this model to help protect internal components.
Q: What is the nominal speed of the MDD065A-N-040-N5M-095GA0?
A: The nominal speed for this motor is 4000 min⁻¹.
Q: What is the connection type and direction on the MDD065A-N-040-N5M-095GA0 motor?
A: This motor uses a connector for its electrical connection and is accessible from Side A.
