Product Description:

The MDD065A-N-040-N2M-095GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary motion for positioning tasks in automated machinery. Motor size 065 and length code A give it a compact footprint that suits tight axis layouts, while the standard housing allows machine installation without additional adapters. It is suitable for indexing units, small handling axes, and other machines that depend on repeatable servo response.

Mechanical interfacing centers on a 95 mm centering diameter that aligns the flange to gearboxes or mounting plates. Standard rotor balancing helps reduce residual vibration during operation. All power and encoder conductors exit on Side A, and the signal pair terminates through a keyed connector for secure plug-in installation. A shaft seal blocks lubricant ingress from the driven machine, and the shaft end is supplied in standard form without an extension on side B. Rated continuous torque at standstill is 0.8 Nm, and the motor can reach a nominal speed of 4000 rpm for rapid indexing.

Position feedback is generated by an integrated multiturn absolute encoder, and its signals are processed as digital servo feedback by the controller for closed-loop regulation. Absolute position information remains available after power cycling, which supports applications that need repeatable startup behavior. Because the unit is supplied without a blocking brake, applications that require static holding torque must rely on the drive's current control or an external clamp. The rotor couples to loads through a plain shaft, which simplifies hub connection when keyways are unnecessary. The standard housing and connection hardware support routine machine installation.