MDD065A-N-040-N2L-095PR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD065A-N-040-N2L-095PR1 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features a continuous torque at standstill of 0.8 Nm, a nominal speed of 4000 rpm, and comes with digital servo feedback. The motor includes a holding brake with 3.0 Nm torque and a 95 mm centering diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat builds the MDD065A-N-040-N2L-095PR1 for use with digital drive controllers in the MDD Synchronous Motors series. The unit is a permanent-magnet servo motor intended to generate commanded torque and velocity in automated axes, transferring drive power directly to machinery without mechanical gearing losses. Its role in industrial automation is to provide repeatable motion profiles under closed-loop control so that positioning, indexing, or rapid cyclical tasks remain within specified tolerances. This arrangement supports accurate response during start-stop motion and steady running in compact machine assemblies.
The motor sustains a nominal speed of 4000 rpm, allowing rapid cycle times when paired with suitable drives. A continuous standstill torque of 0.8 Nm allows the rotor to hold load during static positioning without overheating. When power is removed, a blocking brake delivers 3.0 Nm of holding torque to secure the shaft. Feedback is supplied through digital servo feedback, giving the controller high-resolution rotor position data for precise loop control. Alignment to adjacent machine parts is aided by a centering diameter of 95 mm, while the rotor is trimmed to a standard balancing grade to limit vibration. A right-angle connector interface simplifies cable routing, and the housing is supplied in the standard non-cooled form so surrounding air must carry away the generated heat.
Cable entry is on the Right side, matching installations where power and feedback harnesses are routed laterally. The shaft has a keyway for positive drive element locking, and a concentric shaft seal helps prevent lubricant migration when the motor is mounted on fluid-filled gear stages. The frame size is 065, while length code A keeps the overall body short for compact equipment envelopes. A standard single-ended shaft with no extension on side B reduces overhang load on the front bearings and suits pulleys or belt wheels mounted close to the flange. This layout leaves more room around the rear of the motor in tight axis spaces where cable clearance is limited.
Frequently Asked Questions about MDD065A-N-040-N2L-095PR1:
Q: Does the MDD065A-N-040-N2L-095PR1 motor include a holding brake, and what is its torque?
A: This model is equipped with a blocking brake with a holding torque of 3.0 Nm.
Q: How is the electrical connection configured on the MDD065A-N-040-N2L-095PR1?
A: The connection for this motor is located on the right side and uses a connector.
Q: What type of motor feedback does the MDD065A-N-040-N2L-095PR1 use?
A: The MDD065A-N-040-N2L-095PR1 features digital servo feedback (DSF) for motor feedback.
Q: What is the continuous standstill torque rating for the MDD065A-N-040-N2L-095PR1 motor?
A: This model produces a continuous torque of 0.8 Nm at standstill.
Q: What is the nominal speed of the MDD065A-N-040-N2L-095PR1 motor?
A: The MDD065A-N-040-N2L-095PR1 operates with a nominal speed of 4000 min⁻¹.
