Product Description:

The MDD065A-N-040-N2L-095PL1 is a synchronous servo motor built by Bosch Rexroth Indramat and supplied under the MDD Synchronous Motors series. It uses a size 065 frame with an A-length body, giving it a compact housing for positioning and speed-control duties in automated machinery. Designed to operate with compatible digital drive controllers, the motor converts commanded current into precise rotary motion. This makes it suitable for feed axes, light handling systems, and other applications that require repeatable motion.

At standstill, the rotor can deliver continuous torque of 0.8 Nm, indicating the load it can hold indefinitely without exceeding thermal limits. When energized with rated current, the motor reaches a nominal speed of 4000 rpm, matching common transmission ratios in textile winders and small pick-and-place axes. To secure the shaft after supply power is removed, an integrated holding brake supplies up to 3.0 Nm of static torque, which helps prevent back-driving on vertical or suspended loads. Position information is provided through digital servo feedback, allowing the drive to maintain closed-loop control with accurate rotor angle data. The motor also uses a centering pilot of 95 mm, which supports repeatable alignment with gearboxes or flange adapters and helps limit radial runout.

Power and signal connections are oriented on the left side of the housing, which can simplify cable routing in compact machine layouts and pairs with the single-plug connector interface. The output shaft uses a keyway for positive torque transmission, and a shaft seal helps keep lubricant in the bearing area while limiting contaminant entry. A factory-installed blocking brake maintains shaft position when the axis is stopped. The motor has one standard shaft end with no extension on side B, and standard balancing helps limit vibration through the operating speed range.