Product Description:

The MDD065A-N-040-N2L-095PB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, converting commanded current into controlled rotary motion so automated axes can follow precise position and velocity paths. Its compact 065 frame size and A length suit light-duty material handling, small gantry systems, and feeder modules where installation space is limited. The small motor envelope also supports responsive motion on axes where low moving mass is important.

The motor sustains a continuous standstill torque of 0.8 Nm, giving the drive steady holding capability during low-speed operation without excessive heating. Under motion, it reaches a rated speed of 4000 rpm, supporting quick cycle times while remaining within the thermal capability of the standard housing and balance grade. Position and velocity data are provided through digital servo feedback (DSF), so the controller can maintain closed-loop accuracy without a separate external encoder interface. Power, brake, and signal conductors terminate through a single industrial connector, which keeps cable entry consolidated. A centering diameter of 95 mm helps align the motor accurately with couplings and gearbox interfaces.

During power-off conditions, a blocking brake rated at 3.0 Nm locks the shaft so vertical or suspended loads are less likely to drift. All electrical terminations exit on Side B, which supports consistent cable routing on machines arranged for right-hand access. Mechanical output is transferred through a single-ended shaft with a keyway, allowing standard hubs and pulleys to transmit torque securely. The shaft is supplied with a shaft seal, which helps limit the entry of fine dust or oil mist at the bearing area during normal operation. This sealing arrangement is useful in equipment areas exposed to light contamination from nearby process materials.