Product Description:

The MDD065A-N-040-N2L-095PA0 synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a MDD065A-N-040-N2L-095PA0 unit, it serves as a compact rotary actuator for digital drive controllers and supplies closed-loop motion in assembly cells, pick-and-place heads, and other automated axes. The product type is a motor for digital drive controllers, and its A-length housing keeps overall mass and inertia low while preserving the standard enclosure form. This layout supports installations where limited space and fast acceleration response are required.

Its continuous torque at standstill reaches 0.8 Nm, which is the maximum static load the rotor can support without overheating when current is applied and rotation is blocked. During normal operation, the rotor can accelerate to 4000 rpm, a nominal speed that matches high-frequency inverters used on light indexing tables. Mounting is simplified by a 95 mm centering diameter, which provides a concentric seat for rigid flange attachment. A shaft seal is fitted to protect the bearing cavity against lubricant escape and dust ingress at rated speed. Position and velocity are reported through digital servo feedback (DSF), allowing the controller to close precise loops without external encoders. The motor has a keyway shaft, a single shaft end, and a connector on the stator housing that carries both power and feedback conductors.

Cables are routed through a connection on side A, which keeps bends short inside compact cabinets. The rotor uses standard balancing, so it runs smoothly throughout its speed range. The design is supplied without a blocking brake, so any vertical axis must rely on an external holding device when power is removed. Frame code 065 indicates the stator diameter, and the standard housing matches this motor size.