MDD065A-N-040-N2L-095GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911253355
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
26 Seconds
The Bosch Rexroth Indramat MDD065A-N-040-N2L-095GR1 is a motor for digital drive controllers from the MDD Synchronous Motors series. It has a nominal speed of 4000 rpm and provides a continuous torque at standstill of 0.8 Nm. The motor features a plain shaft with a shaft seal and comes with a holding brake offering a torque of 3.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065A-N-040-N2L-095GR1 is a compact synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into precise rotary motion for indexing tables, pick-and-place modules, and packaging axes. A plain shaft with no side B extension simplifies connection to pulleys or couplings, while the onboard encoder returns position data for closed-loop regulation. The connector-ready interface also helps keep wiring compact in multi-axis cabinets where space around adjacent components is limited. This layout supports accurate starts and stops in machines that require repeatable positioning over short travel distances.
At standstill, the motor delivers a continuous torque of 0.8 Nm without exceeding thermal limits during locked-rotor operation. The motor reaches a nominal speed of 4000 rpm, allowing the paired drive to maintain responsive motion over a wide operating range. A 95 mm centering diameter supports accurate alignment during mounting, and the power and feedback leads exit on the right side for cleaner cable routing in side-mounted assemblies. Position information is carried through Digital servo feedback (DSF), which gives the controller the data needed for commutation, speed regulation, and precise axis positioning. Standard balancing helps reduce vibration during operation, and the housing supports convection cooling in enclosed machinery.
An integrated blocking brake provides 3.0 Nm of holding torque to keep the shaft in place when power is removed. The motor has size 065 and length code A, giving it a short body that fits narrow machine frames and compact motion modules. The shaft is supplied with a shaft seal, which helps limit contamination at the shaft opening. Electrical power and feedback signals are grouped in a single connector that matches the series quick-lock plugs. Grouping these connections at one interface helps keep cable routing orderly near the motor housing.
Frequently Asked Questions about MDD065A-N-040-N2L-095GR1:
Q: What is the nominal speed of the MDD065A-N-040-N2L-095GR1 motor?
A: The MDD065A-N-040-N2L-095GR1 motor features a nominal speed of 4000 min⁻¹, making it suitable for fast rotational applications.
Q: Does the MDD065A-N-040-N2L-095GR1 motor include a holding brake?
A: This model is equipped with a blocking brake providing 3.0 Nm of holding torque for secure shaft positioning.
Q: What is the centering diameter of the MDD065A-N-040-N2L-095GR1 motor?
A: The centering diameter for this motor is 95 mm, facilitating precise mounting alignment.
Q: What type of feedback does the MDD065A-N-040-N2L-095GR1 motor use?
A: Digital servo feedback (DSF) is used on this model to enable accurate positioning and control.
Q: What is the connection type and direction of the MDD065A-N-040-N2L-095GR1 motor?
A: The electrical connection on this motor uses a connector positioned to the right.
