Product Description:

The MDD065A-N-040-N2L-095GL0 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into rotary motion for positioning tasks and cyclic operation in packaging machines, pick-and-place gantries, and other automated axes. Its compact housing suits installations that need moderate torque and high speed without taking up excessive space around the machine. This type of motor is commonly used on axes that need repeatable acceleration and accurate response to changing load commands.

Its mechanical interface uses a centering diameter of 95 mm, which provides a repeatable mounting reference on the machine face. The motor has a continuous stall torque of 0.8 Nm, so it can hold that level of shaft load continuously under proper operating conditions. Under drive excitation, the rotor reaches a nominal speed of 4000 rpm, which supports rapid indexing in short-duty cycles. The unit is supplied with a plain shaft, so torque is transferred through friction couplings rather than keys. Position information is returned through digital servo feedback, allowing the controller to monitor motor movement during closed-loop operation. Standard balancing helps reduce vibration during high-speed operation and supports smoother running in compact drive assemblies.

Power and feedback connections exit on the left side of the stator, which can simplify cable routing where adjacent machine parts limit access. The motor uses a single inline connector to carry motor power and encoder signals through one keyed interface. This arrangement reduces the number of separate connection points at the motor housing. Frame designation 065 identifies the motor size, and the housing includes a shaft seal to help keep coolant spray and airborne particles away from the bearing area. Because the motor is supplied without a blocking brake, holding force must be provided by the drive or by an external clamp when the axis is de-energized.