Product Description:

The MDD041C-N-100-N2K-050GB1 synchronous motor is built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit supplies tightly controlled torque and speed to compact automation axes where high spindle velocity and small inertia are needed. Its standard housing and balancing simplify drop-in replacement on packaging lines, pick-and-place modules, and other servo-regulated stations.

During continuous duty at standstill the motor sustains 2.05 Nm of torque, giving enough holding force for indexing tables without overheating. When commanded to rated velocity, it reaches 10000 min⁻¹, allowing direct coupling to small diameter pulleys or high-speed spindles. A blocking brake rated at 1.2 Nm is fitted to secure the load whenever power is removed. Mechanical centering relies on a 50 mm pilot diameter that aligns the flange accurately. Power and feedback conductors exit on Side B, enabling cable routing away from the driven shaft.

Electrical connection is via a sealed Connector that mates with Rexroth hybrid cables, while position data are handled by Resolver feedback integrated inside the encoder housing for noise-immune absolute measurement. The motor carries length code C, balancing axial footprint with thermal capacity inside the 041 frame. A Plain shaft with a factory-installed shaft seal prevents lubricant migration and supports couplings that rely on frictional clamping rather than keyways. Standard housing and dynamic balancing further minimize vibration across the full speed range.

Wake Industrial can arrange same-day shipping for urgent rebuilds. International shipping options are also available to keep global plants supplied. In addition, quotations issued for this motor remain valid for 30 days, aiding budget approval cycles.