Product Description:

The MDD041C-N-100-N2K-050GB0 is a synchronous servo unit from the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. Designed as a motor for digital drive controllers, it converts commanded current loops into rapid, accurate rotary motion for positioning tables, pick-and-place heads, and other automation axes where compact high-speed performance is required.

The motor sustains a continuous standstill torque of 2.05 Nm, enabling controlled holding or low-speed indexing without overheating. During operation it reaches a nominal speed of 10000 min⁻¹, which supports fast cycle times in light-inertia mechanisms. A centering diameter of 50 mm provides repeatable location against the mounting pilot, and the mechanically ground plain shaft couples directly to precision hubs or pulleys. Rotor position is returned to the drive through resolver feedback, allowing secure absolute position reporting even if power is lost.

Electrical and service interfaces emerge on Side B of the housing and use a sealed connector system to simplify exchange in crowded panels. Contamination ingress at the rotating interface is limited by construction with a shaft seal, while dynamic stopping hardware is omitted because the unit is supplied without a blocking brake. Standard balancing minimizes residual vibration, and the C-length frame pairs with size-041 stator iron to fit cabinets where axial depth is constrained.

Wake Industrial provides international shipping options to accommodate global facilities. Each purchase carries a 1-year warranty from Wake Industrial. For budgeting purposes, quotes issued for this motor remain valid for 30 days.