Product Description:

The MDD041C-N-100-N2G-050PB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Designed for use with digital drive controllers, the unit converts electrical command signals into precise rotary motion for axes that require high speed and consistent torque in industrial automation environments. Its compact frame suits motion systems that need accurate positioning and quick response during repetitive machine cycles. This makes it suitable for packaging, handling, and other automated equipment where controlled speed changes and repeatable positioning are important.

At its nominal operating point, the rotor reaches 10000 rpm, allowing fast cycle movements in pick-and-place or spindle duties. Continuous stall capability of 2.05 Nm keeps shaft torque stable when the axis is held energized but motionless. Accurate mechanical registration is supported by a centering diameter of 50 mm, which gives a repeatable fit against machine frames. Power and feedback conductors exit on side B through a sealed connector, which allows cable attachment without additional termination work at the motor housing. Position and velocity data are delivered through resolver feedback, a sensor format that tolerates electrical noise and rapid acceleration. The motor uses standard balancing and a standard housing configuration. It also has length code C with a single-ended shaft on the drive side, which helps keep the rear of the motor compact for machine layouts with limited space.

An integrated blocking brake provides 1.2 Nm of holding torque during power-off states and releases when the axis is energized. This helps prevent unintended movement while the machine is stopped. The output shaft uses a keyway and includes a shaft seal that limits lubricant migration toward the resolver cavity. Size designation 041 keeps rotor inertia low, which supports rapid acceleration and deceleration on compact axes.