Product Description:

The MDD041C-N-100-N2G-050FB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Serving as a rotary actuator for digital drive controllers in industrial automation, it delivers commanded torque and speed to index tables, pick-and-place heads, and other motion axes. The motor uses a standard housing that simplifies alignment with adjacent machine elements, and its compact frame supports installation in densely packed machine layouts. In closed-loop operation, the motor responds quickly to changing command values so positioning and speed control remain stable during repeated cycles.

The motor sustains a continuous standstill torque of 2.05 Nm, so it can hold loads steadily while the drive issues micro-incremental commands. When energized, it can reach a nominal speed of 10000 rpm, permitting rapid cycle times in light-duty servo axes. Accurate mounting is assisted by a centering diameter of 50 mm that aligns the flange with the machine frame. Power and feedback conductors are routed toward Side B, and the interface is a sealed industrial connector that keeps cable attachment straightforward. Rotor position and speed feedback are returned to the controller by a resolver, supporting stable commutation and speed regulation across the operating range.

For stopping safety, this model is supplied without a blocking brake, so installations that need static holding must rely on external clamps or drive torque. The drive side features a plain shaft built to motor size 041 proportions and shipped in a standard single-ended configuration, so no secondary shaft projects from the rear face. Because the output shaft is delivered without a shaft seal, the motor is intended for clean, dry environments where fluid ingress is not a risk. Length code C keeps the overall body short, and the rotor's mass properties support smooth rotation throughout the speed range.