Product Description:

The MDD041B-N-100-N2G-050FB0 is a brushless synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied as part of the MDD Synchronous Motors series. It is intended for use with compatible digital drive controllers, where it provides regulated torque and speed for pick-and-place axes, small packaging machines, and other light-duty automation tasks. The motor converts three-phase electrical input into fast, controllable rotation for closed-loop motion systems directed by a PLC or similar controller. Its brushless design supports responsive speed changes and repeatable positioning in compact machine assemblies.

The motor has size 041 and length code B, giving it a short stack that helps limit mass while preserving stiffness. At its rated operating point, the rotor reaches a nominal speed of 10000 rpm and delivers a continuous standstill torque of 1.35 Nm without exceeding permissible winding temperature. A centering diameter of 50 mm aligns the flange on machine frames, while standard balancing helps keep residual vibration within normal limits. The output side uses a plain shaft, and there is no side-B shaft extension. No shaft seal is fitted, so the motor should be installed in a protected environment.

Electrical and feedback interfaces are grouped at the rear, with power and sensor cables routed on Side B of the stator and terminated through a compact Connector. Axis position is reported by integrated Resolver feedback, allowing the controller to monitor rotor position during operation. The motor is supplied without a blocking brake, so applications that need holding force must use an external mechanism or energized servo holding torque. Rear cable routing can help reduce cable projection in tightly spaced machine layouts, and the unsealed shaft area should be protected from contaminants during operation.