Product Description:

The MDD025C-N-100-N2K-040MR1 is a compact servo unit manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It operates with digital drive controllers to convert commanded currents into precise rotary motion for tooling heads, pick-and-place axes, and light conveyor stations. Featuring a C-length housing and standard dynamic balancing, the motor addresses high-speed automation tasks where low inertia and fast response are required.

The mechanical envelope starts with a centering diameter of 40 mm, helping mount the flange accurately against gearboxes or fixture plates. At standstill the windings sustain 0.90 Nm of continuous torque, adequate for small grippers or spindle orientation without thermal overload. Power and feedback conductors exit on the Right side so cable carriers remain on a single machine edge. Under rated excitation the rotor reaches 10000 min⁻¹, supporting rapid indexing in packaging or dosing equipment. A sealed industrial Connector permits swift swap-outs while maintaining contact integrity under vibration.

A blocking brake integrated at the non-drive end supplies 1.0 Nm of static holding torque, securing vertical axes when power is removed. Position data is returned through Resolver feedback, allowing reliable angle calculation even in electrically noisy environments. The motor belongs to size 025, and its shaft is finished with a Keyway so pulleys or couplings can be clamped without slip. Because the housing is delivered without a shaft seal, installations should avoid direct coolant spray, and the standard exterior finish aligns thermally with other Indramat modules.

Wake Industrial stocks this model for immediate fulfillment. Same-day shipping is available when rapid restoration of service is critical. All quotations remain valid for 30 days to ease procurement scheduling.