Product Description:

The MDD025C-N-100-N2K-040GF0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it supplies compact rotary motion for indexing tables, pick-and-place axes, and other high-cycle automation stages. Its C-length frame and 025 stator diameter keep the inertia low, making the unit suitable for rapid acceleration tasks in closed-loop industrial motion systems.

Its continuous torque at standstill reaches 0.90 Nm, and the rotor can sustain a nominal speed of 10000 min⁻¹, so the drive can hold light loads while maintaining high shaft velocity. Mechanical alignment is aided by a 40 mm centering diameter and by standard dynamic balancing, reducing vibration in high-speed service. Feedback of electrical angle is handled through Resolver feedback, giving the controller absolute position data even during power interruptions. Cable exit is oriented to the Right, which simplifies routing in cabinets where adjacent equipment limits vertical space. The motor follows length code C, pairing a short stack with the 025 frame to minimize mass without sacrificing speed capability.

Signal and power reach the stator through a Connecting cable with coupling unit, while an Integrated absolute encoder supplies finer resolution for velocity loops than the resolver alone. The rotor is held only by drive torque because the unit is supplied without a blocking brake; applications needing static holding must add external clamps. A plain shaft is protected by a With shaft seal arrangement that limits lubricant egress and airborne contaminants, and the shaft end is standard with no side B extension. The housing is the standard unpainted style, and the overall build matches the product type required for Rexroth digital controllers.