Product Description:

The MDD025C-N-100-N2G-040PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for pairing with digital drive controllers, this unit supplies controlled torque and speed to compact pick-and-place heads, feeders, or tool spindles that require rapid response in industrial automation. Its electromagnetic design and standard housing allow continual high-speed duty while keeping overall mass low for lightweight machine axes. Factory balancing to a standard grade minimizes vibration transfer to precision mechanics, and its shaft seal keeps lubricant in and contaminants out.

Performance characteristics center on a nominal speed of 10000 min⁻¹, making the rotor suitable for fast-cycling stations where short positioning times are critical. At standstill it can deliver a continuous torque of 0.90 Nm, and an integrated blocking brake holds the shaft with up to 1.0 Nm when power is removed, preventing drift on vertical axes. Position and velocity feedback are generated by a Resolver feedback transducer, giving the drive sinusoidal angle information over the full speed range. Power is transmitted through a shaft machined with a keyway, allowing straightforward coupling to gears or pulleys without relying on friction fits.

Mechanical mounting and wiring features complete the interface profile. The front flange provides a centering recess of 40 mm, ensuring repeatable alignment to machine frames. Signal and power plugs exit on the Left side, and the motor uses a single circular Connector for quick cable replacement during service. With the compact 025 frame size and the C length code, the motor occupies minimal envelope yet retains standard housing and shaft-seal construction for IP protection. Dynamic balance remains within the specified standard class, and the absence of a secondary shaft end simplifies coupling guards.