Product Description:

The MDD025C-N-100-N2G-040PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Intended for integration with digital drive controllers, the motor translates commanded current into accurate shaft rotation for pick-and-place gantries, compact packaging stations, and other motion sequences that demand high speed feedback and tight positional repeatability. By supplying continuous torque through its permanent-magnet rotor, the device supports dynamic acceleration profiles while keeping envelope dimensions small enough for dense multi-axis installations.

At standstill the motor delivers 0.90 Nm of continuous torque, defining the load it can hold without overheating. Under rated conditions the rotor reaches 10000 min⁻¹, enabling fast cycle times in short-stroke axes. A 40 mm centering diameter aligns the flange with mounted equipment. All power and feedback conductors exit on the Left side because the angled plug is a Connector type fixed in that orientation, simplifying service access. Standard balancing limits vibration throughout the usable speed range.

Complementing the mechanical profile, the motor uses resolver feedback to relay absolute rotor position with high noise immunity, supporting smooth vector control at the full speed range. Motion safety during power-off is handled externally because the unit ships without a blocking brake, reducing inertia and overall length; that length is coded as C within the series and pairs with the compact 025 frame size. Output torque is transferred through a keyed shaft; the interface is a keyway form and is protected by a labyrinth arrangement that arrives with a shaft seal to limit lubricant loss and particle ingress. A standard housing finish and single-ended shaft complete the configuration for sealed cabinet environments.