Product Description:

The Bosch Rexroth Indramat MDD025C-N-100-N2G-040PF1 is a synchronous motor in the MDD Synchronous Motors series. Built for digital drive controllers, it converts electrical power into rapid rotary motion used in pick-and-place modules, printing cylinders, and packaging spindles within industrial automation. Bosch Rexroth Indramat presents the compact 025-frame unit as a high-speed option that fits standard mounting patterns while meeting normal housing and balancing grades.

Its rated shaft speed reaches 10000 min⁻¹, enabling direct coupling to high-velocity loads without secondary gearing. Continuous torque at standstill is 0.90 Nm, allowing the axis to support moderate inertia without thermal overload. Power and feedback conductors exit on the Right side, and the factory-supplied Connecting cable with coupling unit secures shielding and strain relief. Precise installation is aided by a flange centering shoulder of 40 mm diameter that maintains concentricity with attached machinery. Standard dynamic balancing keeps vibration within ISO limits even when the rotor spins at maximum speed.

For static holding or emergency stops, the integrated blocking brake produces 1.0 Nm of braking torque. Rotor position is delivered through Resolver feedback, providing analog sine-cosine signals that remain stable across a wide temperature span. Torque is transmitted by a keyway shaft end, preventing hub slippage during fast accelerations. The motor uses length code C, increasing active stack length for additional thermal capacity without changing the external diameter. A shaft seal is fitted to block dust or coolant ingress into the front bearing chamber, and the absence of a side B shaft end simplifies coupling to gearboxes or pulley systems.