Product Description:

The MDD025C-N-100-N2G-040PE1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied as part of the MDD Synchronous Motors series. It is specified as a motor for digital drive controllers and is used to create precise closed-loop motion in compact pick-and-place stations, small actuators, and light conveyor axes. The 025 frame size and standard housing keep the unit compatible with tight mechanical envelopes, while the standard balancing class ensures vibration levels stay within limits demanded by high-speed automation.

This model reaches a nominal speed of 10000 min⁻¹, allowing high throughput where rapid indexing cycles are required. At standstill it delivers 0.90 Nm of continuous torque, so it can hold loads without thermal overload during dwell periods. A blocking brake is fitted, supplying 1.0 Nm of static torque to secure vertical or suspended axes whenever power is removed. Rotor position is reported through Resolver feedback, giving absolute angle information that remains valid after power cycling. Alignment to gearboxes or mounting flanges is aided by a centering diameter of 40 mm, which defines the pilot seat for coaxial installation.

The electrical and feedback leads exit on the Left side because the connection hardware is a Connecting cable with coupling unit, simplifying cabinet wiring in multi-axis clusters. Torque is transferred through a keyway shaft, and the front bearing region is protected by a With shaft seal arrangement that limits lubricant escape and particle ingress. A standard shaft end on side A, with no extension on side B, reduces length and inertia. The motor length code C identifies the active stack height used to achieve the specified output, while both the housing and balancing remain in the standard configuration to streamline spare-part matching across the series.