Product Description:

The MDD025C-N-100-N2G-040GF0 is a compact synchronous motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for pairing with digital drive controllers, the unit converts electrical commands into precise rotary motion for positioning tables, pick-and-place heads, and similar automation axes. Its standard housing safeguards the winding assembly against typical plant contaminants without adding extra bulk, making the motor suitable for tight machine spaces where high speed and moderate torque must be delivered consistently.

The mechanical interface centers on a diameter of 40 mm, providing an accurate pilot fit that keeps the stator concentric with the driven machine frame. At standstill the motor can deliver 0.90 Nm continuously, giving low-mass axes enough holding capacity without external gearing. During motion it can reach its nominal velocity of 10000 min⁻¹; this high rated speed supports fast cycle times when commanded by the drive. The length designation C indicates an extended active core that raises power density compared to shorter variants. Position and velocity are returned through Resolver feedback, enabling the controller to close high-bandwidth loops even under electrical noise.

Electrical terminations exit to the Right, so cabinet designers can route power and sensor lines away from moving parts. The motor is supplied with a connecting cable with coupling unit, simplifying installation because no on-housing connectors are needed. There is a plain shaft that mates to friction or collet clamping devices, and it is protected by a with shaft seal arrangement that blocks lubricants or dust from entering the bearing region. A standard balance grade minimizes vibration, and the absence of a blocking brake keeps inertial load and maintenance low.