MDD025C-N-100-N2G-040FC0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD025C-N-100-N2G-040FC0 is part of the MDD Synchronous Motors series and is intended for use with digital drive controllers. This motor has a nominal speed of 10,000 RPM, a centering diameter of 40 mm, and produces 0.90 Nm continuous torque at standstill. It includes resolver feedback, a plain shaft without a shaft seal, and is equipped with a connecting cable and coupling unit.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025C-N-100-N2G-040FC0 is a servo unit manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it delivers commanded torque to light-duty positioning stages and high-speed auxiliary axes in automated equipment. The frame is built with Standard balancing to suit commonly used couplings, and its Standard housing promotes heat transfer to the mounting surface without requiring external fins or liquid circuits.
The C length code establishes the overall body depth so the encoder, connector zone, and stator laminations fit inside tight cabinet spaces. A centering boss diameter of 40 mm aligns the flange precisely to adjoining geartrains, while all power and feedback conductors exit on Side A to simplify cable trays. Wiring is completed through a Connecting cable with coupling unit; this preassembled lead reduces installation time and maintains shielding continuity. The motor sustains a continuous standstill torque of 0.90 Nm, enabling stable holding or low-speed feed rates with minimum heating. During dynamic moves it can reach a nominal shaft speed of 10000 min⁻¹, a value monitored through the integrated Resolver feedback that supplies absolute position and velocity information to the drive.
Service features that influence integration are concentrated at the shaft and brake interfaces. The design is delivered without a blocking brake, so external clamping devices must secure vertical loads when power is removed. The plain steel output adopts a Plain shaft profile and carries the Standard specification of “without side B shaft end,” allowing direct coupling on one side only. No shaft seal is fitted, which limits use to clean, dry environments but removes frictional drag. With a compact frame code of 025, the motor saves space in multi-axis tooling heads while still supporting the thermal margin needed for its rated duty cycle.
Frequently Asked Questions about MDD025C-N-100-N2G-040FC0:
Q: What type of motor feedback is provided by the MDD025C-N-100-N2G-040FC0?
A: The MDD025C-N-100-N2G-040FC0 motor utilizes resolver feedback for position detection.
Q: What is the continuous torque at standstill for the MDD025C-N-100-N2G-040FC0?
A: This motor has a continuous torque at standstill of 0.90 Nm, suitable for consistent low-speed operation.
Q: What is the nominal speed capability of the MDD025C-N-100-N2G-040FC0 motor?
A: The MDD025C-N-100-N2G-040FC0 operates at a nominal speed of 10,000 min⁻¹.
Q: What is the shaft configuration on the MDD025C-N-100-N2G-040FC0?
A: A plain shaft without a shaft seal is featured on this motor, and it does not include a shaft end on side B.
Q: How is the MDD025C-N-100-N2G-040FC0 electrically connected?
A: The MDD025C-N-100-N2G-040FC0 is equipped with a connecting cable and coupling unit for electrical connection on Side A.
