MDD025B-N-100-N2K-040ML1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
29 Seconds
The Bosch Rexroth Indramat MDD025B-N-100-N2K-040ML1 is part of the MDD Synchronous Motors series and is designed as a motor for digital drive controllers. It features a nominal speed of 10000 min⁻¹, continuous torque at standstill of 0.60 Nm, and comes with a keyway shaft type. The motor includes an integrated absolute encoder and resolver feedback along with a blocking brake that provides 1.0 Nm holding torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025B-N-100-N2K-040ML1 is a compact synchronous motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for integration with digital drive controllers, the unit converts electrical power into controlled rotary motion for light-duty positioning axes in automated test stands, miniature handling devices, and semiconductor tooling. Its compact format suits installations where moving mass must stay low and response must remain precise over short travel cycles. This layout is useful in small automation assemblies that need accurate starts, stops, and repeatable positioning without the larger footprint of a bigger motor frame.
The motor reaches a nominal speed of 10000 rpm, allowing rapid cycle execution in equipment that demands short index times. Its continuous standstill torque is 0.60 Nm, which indicates the steady load it can support without overheating. A centering diameter of 40 mm helps keep the motor aligned with the mating machine surface. Power and feedback cabling exit on the left side, and all conductors terminate through a single connector, which simplifies routing in compact assemblies. Motion feedback is supplied by an integrated absolute encoder, so position data is available immediately after power-up. The rotor is balanced to a standard grade, and the housing uses the standard construction code. The shaft is built without a side B extension and without a shaft seal, so the installation area should be protected from fluid exposure.
When power is removed, a blocking brake develops 1.0 Nm of holding torque to secure vertical or load-biased axes. Secondary position information is available through resolver feedback, which supports drive control in applications that use this signal type. Mechanical output is transferred through a keyway shaft, matching common couplings used in small transfer mechanisms. The size-025 stator frame and the B-length code keep overall mass low, which helps the motor support fast acceleration without excessive drive current demand.
Frequently Asked Questions about MDD025B-N-100-N2K-040ML1:
Q: Does the MDD025B-N-100-N2K-040ML1 motor come with a holding brake, and what is its braking torque?
A: The MDD025B-N-100-N2K-040ML1 motor includes a holding brake with a torque of 1.0 Nm for secure load holding.
Q: What type of encoder is integrated in the MDD025B-N-100-N2K-040ML1 motor?
A: This model features an integrated absolute encoder for precise position feedback.
Q: What is the nominal speed of the MDD025B-N-100-N2K-040ML1 motor?
A: The MDD025B-N-100-N2K-040ML1 provides a nominal speed of 10,000 min⁻¹.
Q: What kind of shaft type does the MDD025B-N-100-N2K-040ML1 motor use?
A: A keyway shaft type is utilized on this motor to facilitate secure mechanical connections.
Q: What is the connection direction and type for the MDD025B-N-100-N2K-040ML1 motor?
A: The electrical connection on this model is positioned to the left and uses a connector interface.
