MDD025B-N-100-N2K-040FR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
6 Seconds
The Bosch Rexroth Indramat MDD025B-N-100-N2K-040FR1 is a motor designed for digital drive controllers and is part of the MDD Synchronous Motors series. It features a nominal speed of 10000 min⁻¹ and provides a continuous torque at standstill of 0.60 Nm. The motor includes an integrated absolute encoder with resolver feedback and comes equipped with a blocking brake rated at 1.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025B-N-100-N2K-040FR1 is a compact synchronous motor in the MDD Synchronous Motors series. It is supplied for use with digital drive controllers and is intended for automated machinery that needs rapid speed changes and accurate positioning on light moving axes. The motor converts electrical commands into controlled rotary motion, which supports repeatable starts, stops, and short indexing moves. Its compact frame suits small feed systems, handling units, and other servo applications where installation space is limited. An integrated absolute encoder provides one-turn position data, allowing the controller to establish rotor position during closed-loop motion.
A centering diameter of 40 mm provides an accurate reference surface in the mounting flange, and power and feedback lines connect through a pluggable connector. At standstill, the motor can deliver 0.60 Nm continuously, and it supports a rated speed of 10000 rpm for high-cycle applications when matched with a suitable inverter. Closed-loop control uses resolver feedback, which gives the drive continuous rotor position signals during operation. The motor uses size 025 geometry with a B-length housing, and its standard balancing helps keep vibration within normal limits. This combination supports quick response on axes that cycle frequently and stop repeatedly.
An integrated blocking brake applies 1.0 Nm of holding torque to prevent shaft drift when the drive is de-energized. All electrical interfaces exit on the right side of the end bell, which helps keep cable routing predictable in tight cabinets and narrow machine sections. The motor has a single-ended plain shaft and is built without a shaft seal, so the coupling area should be protected from coolant, oil, and other fluids. Side B has no second shaft end, and the standard housing construction keeps the external form straightforward for enclosed machine installations. Because the brake is intended for holding, the drive continues to control normal acceleration and deceleration during machine operation.
Frequently Asked Questions about MDD025B-N-100-N2K-040FR1:
Q: What type of encoder is provided on the MDD025B-N-100-N2K-040FR1 motor?
A: This motor is equipped with an integrated absolute encoder for precise position tracking.
Q: What is the shaft type of the MDD025B-N-100-N2K-040FR1 motor?
A: The MDD025B-N-100-N2K-040FR1 has a plain shaft without a seal for straightforward mechanical coupling.
Q: What is the nominal speed specification for the MDD025B-N-100-N2K-040FR1?
A: The nominal speed of this model is rated at 10,000 min⁻¹, supporting high-speed operations.
Q: Does the MDD025B-N-100-N2K-040FR1 motor have a holding brake and what is its torque?
A: This motor includes a blocking brake, which provides a holding brake torque of 1.0 Nm.
Q: What type of motor feedback does the MDD025B-N-100-N2K-040FR1 offer?
A: Motor feedback is provided via resolver feedback, allowing for reliable motion control information.
