MDD025B-N-100-N2G-040GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
55 Seconds
The Bosch Rexroth Indramat MDD025B-N-100-N2G-040GR1 is part of the MDD Synchronous Motors series and is a motor for digital drive controllers. It features a nominal speed of 10000 RPM, a continuous torque at standstill of 0.60 Nm, and resolver feedback. The motor has a 40 mm centering diameter, includes a plain shaft with shaft seal, and comes with a holding brake providing 1.0 Nm of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025B-N-100-N2G-040GR1 synchronous servo motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is used in high-speed positioning tasks on compact automation axes where quick starts, short move times, and accurate stopping are required. The unit has motor size 025 and length code B, and it uses standard rotor balancing with a standard housing to suit tight machine spaces while maintaining smooth operation. This layout suits small handling units, feeders, and indexing mechanisms that need servo control without a large motor envelope.
The motor has a nominal speed of 10000 rpm, allowing rapid cycles when paired with a compatible inverter. At standstill, it generates 0.60 Nm of continuous torque, which supports static load holding without overheating the winding. An integrated blocking brake provides 1.0 Nm of holding torque for vertical or indexing axes during power loss. Position feedback is supplied through resolver feedback, which provides rotor position information for closed-loop control at high acceleration. Electrical and signal lines exit on the machine's right side through a right-side connection direction, which can simplify cable routing in narrow cabinets.
Mechanical integration uses a face plate with a centering diameter of 40 mm, which helps align the motor with gearboxes or adapter flanges. Power and feedback conductors terminate on a keyed connector, supporting secure electrical attachment in compact installations. The load is driven through a plain shaft, and an embedded shaft seal helps prevent lubricant escape while protecting internal components from airborne coolant. The keyed plug arrangement keeps the power and feedback interfaces grouped at the motor body, which supports orderly cable entry in confined machine sections. The shaft end uses the standard single-sided configuration, and the housing follows the regular series pattern for consistent mounting geometry across the product line.
Frequently Asked Questions about MDD025B-N-100-N2G-040GR1:
Q: What is the nominal speed of the MDD025B-N-100-N2G-040GR1 motor?
A: The MDD025B-N-100-N2G-040GR1 operates at a nominal speed of 10,000 min⁻¹, allowing for high-speed applications.
Q: Does the MDD025B-N-100-N2G-040GR1 include a holding brake and if so, what is its torque?
A: This motor is equipped with a blocking brake that provides 1.0 Nm of holding torque.
Q: What type of motor feedback system is present in the MDD025B-N-100-N2G-040GR1?
A: Resolver feedback is used in this motor for position detection and control.
Q: Which direction is the electrical connection located on the MDD025B-N-100-N2G-040GR1?
A: The connection direction for the MDD025B-N-100-N2G-040GR1 motor is on the right side.
Q: What type of shaft and seal does the MDD025B-N-100-N2G-040GR1 provide?
A: This model features a plain shaft with a shaft seal to help prevent contamination.
