Product Description:

The Bosch Rexroth Indramat MDD025B-N-100-N2G-040GF1 is a synchronous servo motor from the MDD Synchronous Motors series. Designed to operate with digital drive controllers, the unit converts electrical commands into precise rotary motion for light automated axes in packaging, electronics assembly, and inspection lines. By pairing a compact mechanical envelope with high rotational capability, the motor supports rapid positioning where cycle time and mounting space are critical in industrial automation. Its compact format also makes it suitable for tightly spaced machine layouts that require short cable runs and low moving mass.

At stall the rotor can deliver 0.60 Nm of continuous torque, which indicates how much load the axis can hold without movement while current stays within rated limits. During motion the shaft can reach a nominal speed of 10,000 rpm, permitting direct coupling to high-speed spindles or belt drives without intermediate gearing. Position and velocity feedback are obtained through resolver feedback, allowing the drive to sustain closed-loop regulation even in electrically noisy areas. Power and signal conductors exit on the right through a connecting cable with a coupling unit, which allows quick disconnection. Accurate concentricity is assisted by a 40 mm centering diameter on the flange, helping the motor seat consistently against gearboxes or machine plates.

The integrated blocking brake supplies 1.0 Nm of torque to keep the load stationary when the controller is disabled. A plain shaft transmits motion without keyways, suiting clamp collars or friction couplings that favor minimal backlash. With a motor size code of 025, the frame width remains small enough for multi-axis arrays on compact tooling. This layout supports compact installation where adjacent axes must fit closely together. Rotor balance is classified as standard, limiting vibration to levels suitable for high-speed service. A shaft seal helps keep contaminants away from internal components, and the housing carries a baseline protective finish to resist contamination.