Product Description:

The MDD025B-N-100-N2G-040GB0 synchronous motor is produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts current commands into accurate rotary motion for high-speed pick-and-place heads, miniature spindles, and other compact automation axes.

At standstill the rotor supplies a continuous torque of 0.60 Nm, allowing extended holding without overheating. The winding is rated for a nominal speed of 10000 min⁻¹, giving short cycle times in assembly lines. A centering feature of 40 mm keeps the flange aligned to adjoining mechanics, and the rotor is delivered in standard dynamic balance to limit vibration. Power and feedback exit on Side B through a keyed Connector, letting technicians replace the unit without disturbing adjacent hardware.

The control loop uses resolver feedback for absolute position and velocity, maintaining accuracy during rapid reversals. A plain shaft transfers torque directly to couplings, and the front bearing region is protected with a shaft seal to block oil ingress. Because the motor arrives without a blocking brake, static load retention must be handled by the drive or external locks. Housing style, balancing class, and shaft end configuration are all listed as standard; size code 025 and length code B keep mass and inertia low for fast acceleration.

Wake Industrial stocks this model. Same-day shipping options are available for qualifying orders, and each unit carries a 1-year warranty. Formal quotations remain valid for 30 days to support planned maintenance budgets.