MDD025B-N-100-N2G-040FD1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
Current response time:
4 Minutes
5 Seconds
The Bosch Rexroth Indramat MDD025B-N-100-N2G-040FD1 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It features a nominal speed of 10000 rpm, a continuous torque at standstill of 0.60 Nm, and has resolver feedback. This motor has a centering diameter of 40 mm, uses a plain shaft, and comes equipped with a blocking brake providing a holding brake torque of 1.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025B-N-100-N2G-040FD1 is a small-frame servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for pairing with digital drive controllers, it delivers precise rotary motion to compact actuators, test spindles, and pick-and-place heads where high speed and limited continuous torque are required in industrial automation.
The stator housing uses standard balancing and centres on a pilot of 40 mm, simplifying coaxial alignment with gearboxes or fixtures. Under steady current it sustains 0.60 Nm of torque at standstill, allowing rapid starts without overheating. Cables exit on Side B through a connecting cable and coupling unit that shortens wiring time. Rotor position is transmitted via Resolver feedback, giving analogue sine-cosine signals that remain immune to electrical noise. The housing, shaft end, and length code B all follow the series’ standard mechanical envelope so the unit can drop into existing MDD025 mounts.
A blocking brake delivers 1.0 Nm to hold the axis when power is removed, preventing drift on vertical or indexing stations. Once released, the rotor reaches its nominal speed of 10000 min⁻¹, an impressive figure for frame size 025 that enables short machine cycles. Output torque is transferred through a Plain shaft; because the motor is supplied without a shaft seal, it is intended for clean, dry enclosures rather than wash-down zones. Standard housing construction and a single-ended shaft keep mass low and vibration minimal at high speed.
Wake Industrial can arrange same-day shipping for this model when rapid turnaround is required. Every purchase is backed by a 1-year warranty covering parts and labour. In addition, quotations issued for the MDD025B-N-100-N2G-040FD1 remain valid for 30 days to aid procurement planning.
Frequently Asked Questions about MDD025B-N-100-N2G-040FD1:
Q: What is the nominal speed of the MDD025B-N-100-N2G-040FD1 motor?
A: The MDD025B-N-100-N2G-040FD1 motor operates at a nominal speed of 10,000 min⁻¹, allowing for fast movement in automation applications.
Q: What type of feedback does the MDD025B-N-100-N2G-040FD1 motor use?
A: This model features resolver feedback for precise position detection.
Q: What is the holding brake torque of the MDD025B-N-100-N2G-040FD1 motor?
A: A holding brake with a torque of 1.0 Nm is integrated to keep the motor shaft securely in place when stopped.
Q: Where is the connection interface located on the MDD025B-N-100-N2G-040FD1 motor?
A: The MDD025B-N-100-N2G-040FD1 motor utilizes a side B connection direction for its cable interface.
Q: What type of shaft configuration does the MDD025B-N-100-N2G-040FD1 motor provide?
A: This motor has a plain shaft design without a shaft seal or a side B shaft end.
