MDD025B-N-100-N2G-040FD0
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat MDD025B-N-100-N2G-040FD0 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. This motor features a nominal speed of 10000 min⁻¹, a continuous torque at standstill of 0.60 Nm, and resolver feedback. It has a 40 mm centering diameter and a plain shaft without a shaft seal or blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025B-N-100-N2G-040FD0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Engineered as a motor for digital drive controllers, it converts controlled electrical power into rotational motion for tightly regulated positioning or velocity loops in automated machinery. The model belongs to motor size 025 and carries length code B, providing a short axial dimension that suits packed multi-axis assemblies. A standard balanced rotor and standard housing keep mechanical vibration low and allow direct flange mounting inside machines that require rapid motion.
Its centering pilot measures 40 mm, establishing the concentric seat that aligns the motor to adjoining mechanics. Power and feedback conductors exit on Side B, so cabinet layouts can keep cable bends minimal. Termination is through a connecting cable with coupling unit that simplifies removal during service. At standstill the motor sustains 0.60 Nm of continuous torque, which is adequate for light indexing tables and small pick-and-place axes. When commanded by the drive, the rotor can reach a nominal speed of 10000 min⁻¹, giving high cycle rates while remaining within thermal limits set by the stator windings. Resolver feedback supplies absolute rotor position to the controller, enabling closed-loop commutation and smooth servo performance.
The rotor is built with standard balancing, so vibration remains low even at the 10 krpm operating point. Its output interface is a plain shaft delivered in the standard variant that omits a side-B extension, reducing overhung mass. The front bearing area is supplied without a shaft seal, therefore the motor should not be exposed to fluid spray or pressurised wash-down. For holding requirements the assembly ships without a blocking brake; position retention during power-off must be implemented by the drive or by external locking devices. A standard housing provides the regular MDD cooling surface and fits the customary flange pattern.
Frequently Asked Questions about MDD025B-N-100-N2G-040FD0:
Q: What type of motor feedback is used in the MDD025B-N-100-N2G-040FD0?
A: The MDD025B-N-100-N2G-040FD0 operates with resolver feedback for motor position detection.
Q: What is the nominal speed of the MDD025B-N-100-N2G-040FD0 motor?
A: This model has a nominal speed of 10,000 min⁻¹, allowing for high-speed applications.
Q: What is the centering diameter of the MDD025B-N-100-N2G-040FD0?
A: The centering diameter for this motor is 40 mm, ensuring proper alignment during installation.
Q: Does the MDD025B-N-100-N2G-040FD0 come with a holding brake?
A: This motor is manufactured without a holding or blocking brake.
Q: How is the MDD025B-N-100-N2G-040FD0 electrically connected to a drive controller?
A: Connection is made via a connecting cable with a coupling unit on side B of the housing.
