Product Description:

The MDD025A-N-100-N2K-040PR0 is a compact synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed to pair with digital drive controllers, it supplies rapid, closed-loop motion for pick-and-place heads, small gantries, and labeling stations where limited mass and high spindle speed are critical.

This model delivers a continuous standstill torque of 0.33 Nm, enabling light loads to be held without overheating while the drive maintains position. Its maximum operating velocity reaches 10000 min⁻¹, giving short cycle times when driven by frequency-synchronized inverters. Rotor position data is reported through resolver feedback, so the controller can calculate commutation angles even during acceleration. The motor is supplied without a blocking brake; when power is removed, external mechanical means or motor torque must secure the axis.

Mechanical attributes complete the performance profile. A centering pilot of 40 mm aligns the stator to machine plates for concentric rotation, and the power and feedback connectors exit on the right side to simplify cable routing in tight enclosures. Torque is transferred through a splined shaft that follows the DIN key standard; the drive end is specified as a keyway configuration and has no extension on side B. Contaminant ingress is limited by a design supplied with a shaft seal, allowing installation in areas where coolant mist or dust is present without auxiliary covers.

Wake Industrial stocks this motor, can arrange same-day shipping for time-sensitive orders, and issues quotations that remain valid for 30 days.