Product Description:

The Bosch Rexroth Indramat MDD025A-N-100-N2K-040MF0 is a synchronous servo motor placed within the MDD Synchronous Motors series. Intended for pairing with digital drive controllers, it converts commanded current into precise rotary motion for light pick-and-place axes, small conveyors, and laboratory positioning tables across general automation.

Key dynamic figures start with a nominal speed of 10000 min⁻¹, enabling high linear velocities when the motor drives low-inertia mechanics. A continuous standstill torque of 0.33 Nm supports static loads during dwell periods without excess heating. Accurate centering is provided by the 40 mm pilot diameter, and all electrical connections exit to the Right, simplifying harness layout in narrow cabinets. The unit is delivered with a connecting cable and coupling interface for quick installation, while standard rotor balancing keeps vibration within DIN limits at maximum speed. Its standard housing shares mounting geometry with other MDD frames for interchangeable use.

Feedback hardware completes the control loop; an integrated absolute encoder provides multi-turn position data that the drive interprets via resolver feedback for micro-step accuracy. The shaft follows a keyway profile, lacks a side-B extension, and runs without a shaft seal to reduce friction. Because the assembly ships without a blocking brake, external clamping or electromechanical holding must be applied when power is removed. Compact dimensions are defined by motor size 025 and length code A, giving a favorable torque-to-mass ratio for multi-axis clusters.

Wake Industrial backs every purchase with a 1-year warranty. Same-day shipping is available when quick turnaround is required. Quotations remain valid for 30 days to streamline procurement planning.