Product Description:

The MDD025A-N-100-N2K-040GR0 synchronous motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts commanded current into regulated torque and speed for pick-and-place stations, small gantries, and precision indexing tables. In these applications the unit provides compact, high-response actuation that supports tight positional accuracy and fast cycle times.

At standstill the rotor delivers a continuous torque of 0.33 Nm, giving predictable holding force for lightweight axes. High-speed motion is possible thanks to a nominal velocity of 10000 min⁻¹, allowing linear travel without additional gearing. Accurate alignment is assisted by a centering diameter of 40 mm, while the mounting flange presents a Plain shaft that couples directly to pulleys or bellows couplings. These parameters establish the dynamic envelope and mechanical interface designers must evaluate during installation.

The sensing and protective features round out the profile. Position and velocity are reported through Resolver feedback working in tandem with an integrated absolute encoder so the axis knows its location immediately after power-up. A factory-installed shaft seal limits contaminant ingress at the output end, and the motor is supplied without a blocking brake, relying on drive-generated holding torque when stopped. Compact dimensions derive from motor size 025 and length code A, keeping weight and inertia low for rapid acceleration and deceleration.

Wake Industrial currently stocks this motor for immediate order fulfillment. Same-day shipping is available when production schedules are tight. Formal quotations remain valid for 30 days to support budgeting and approval processes.