Product Description:

The Bosch Rexroth Indramat MDD025A-N-100-N2K-040FD1 belongs to the MDD Synchronous Motors series and serves as a permanent-magnet servo motor for digital drive controllers in automated equipment. This compact motor is intended for high-speed axes in pick-and-place modules, small positioning tables, and similar motion platforms where tight velocity control is required. By converting drive current into precisely regulated rotary motion, it acts as the mechanical output stage in a closed-loop drive system. Its compact frame also suits machine sections where installation space is limited and low moving mass is preferred.

The housing uses a 40 mm centering diameter to align the motor with mating flanges, and the rotor has a standard balance state to limit residual vibration at rated speed. Power conductors exit on Side B, which helps route cables at the rear of compact installations and can reduce congestion around the mounting face. At standstill, the motor provides 0.33 Nm of continuous torque, and it can reach 10000 rpm in applications that require high rotational speed. This combination suits light inertia loads that need quick acceleration and short cycle times.

Electrical connection is made through a connecting cable with a coupling unit, which combines the motor leads and keeps the assembly compact. This arrangement reduces the need for separate connection hardware at the motor body and helps keep the outer profile simple. Position data come from an integrated absolute encoder, allowing the drive to detect rotor position directly during operation. When power is removed, the blocking brake can apply up to 1.0 Nm of holding torque to keep the shaft from turning. The motor is supplied without a shaft seal, and the drive-side shaft end follows a standard plain-shaft arrangement for clean, enclosed installations.